Inspection & Measurement

Description HOLE LOCATION PLUGS All diameters concentric within .0001 T.I.R. Shaft dia. (C) .2500 + .0002, - .0000 on all gages to simplify calcula...

Bore Gage Setting Master Kit is used for accurately setting any bore gage up to 6". Each Set Includes: 1-Setting Device Base Anvil: 2.750" x .80" ...

Accepts head in ranges of: .236-.630" (6-16mm)  and .630-7.874" (16-200mm).

This product is Quote Only. Complete form or Call +1(800) 879-7575 to order. Description Easy to use Spherical Plug Gages. Gages entire bore precis...

0-6"/150mm Range Resolution: .00005"/.001mm   Features: Interchangeable stainless rods, .160" dia. Satin Chrome base, 4" L x .640" W, hardened wit...

Available in ranges up to 4"/100mm. Superior Protection Against Water, Coolants, Dust & Oil Features Features: Large LCD Display Inch-metric a...

Carbide Precision Indicator Contact Tips Precision contact tips manufactured for use on standard drop style dial indicators. Available with Grade 2...

Includes .030" Travel Test Indicator & Case. Highly useful for centering holes on milling machines. 3D Articulating Arm Features: ⅜" dia. x 40...

Fully Jeweled Movement • Auto-Reversing Features Features: Precision quality Adjustable bezel and dial 5/32" and 3/8" diameter mounting shanks Con...

Available in 2 ranges 0-12" & 0-20" Leg Style Depth Gage Details Resolution: .0005"./.01mm Repeatability: 1 digit 10µm/.0005" Precision Made o...

4", 6", and 8" Available. Quality Spring Calipers and Dividers Quick and Positive Adjustment CHROME PLATED FINISH Fully hardened and tempered jo...

This adaptor fits with any of the 3 sizes of Jaw Clamp-Ons (Model No. 22336, 22338 or 22339) For more information, check out our latest catalog page. 

Caliper Attachment For Use With Flexbar Indicator Balls Caliper Attachment, fits all 6" Calipers. Clamp on to Caliper jaws, allows attachment of S...

Available for 18" and 12" Calipers. Caliper attachment accessories for use with Flexbar indicator balls and depth probes. Clamps on to caliper jaw...

To design the Anvil head for Slot measurement, the following information is required:  Entry Diameter Length of Component Datum point diameter Min...

Available in two or three point thread measurement heads according to application.

Precise groove measurements are made easily and accurately. Application requirements for groove width minimum is .060" (1.5mm). Groove depth may no...

Description An advanced hardness tester distinguished by its very compact size, high accuracy, wide measuring range and simplicity of operation. It...

Available in  N-Diamond 15Kg (Round) HR15Ns from 72 to 91.5.   Manufactured from the highest quality steel with a special heat treat and cold treat...

Thread Measuring Wires accuracy is .00008". (USA Set) Includes 48 Wires in 16 different sizes. Measures all U.S. 60 Degrees threads. Lamin...

For use with 15945 Ultrasonic Thickness Gage

90° Probe for Ultrasonic Thickness Gage .250" Diameter    

Harpenden Skinfold Caliper body assessment software. For use with SFC-1000 Harpenden Skinfold Caliper.  Software is not MAC compatible.

.0005" Resolution, 1.4-6" Range   Features: Complete set with measuring range from 1.4-6" For close tolerance measurements of holes, taper and rou...

0-6" Depth Micrometer Set with .001" Graduations.   Features: Base is hardened and ground. Length of base - 4". Hardened and ground screw has 1" m...

For rapid measurements of metal sheets, wire, plastic, paper, rubber, etc. Graduation .001" Dial face diameter 1⁹/₁₆". Continuous Dial. Throat .50...

PREMIUM QUALITY - Made in Japan. Features Features: One-piece, forged bronze case for strength and durability Nickel-plated case interior and mov...

Made in Japan. Features Extremely Smooth Precision Gears. Inch and Metric Models Features Features: Contact point made of tool steel, hardened gro...

Individual Dial Indicator Points The same quality points that make up our deluxe indicator point sets. Available from stock with standard inch AGD ...

Available in Black Face and Long Point, and 2 Readings/Ranges. Features Features: Auto-Reversing Accuracy meets or exceeds Federal Specifications ...

Replacement Battery for Flexbar Digital Electronics 3-Point Internal Micrometers.

Standard insert included in the delivery of the basic instrument. For more information, check out our complete line of Digi-Met Depth Gage and Inse...

Direct RS232C Opto-Electric Output Cable for all Digi-Met Direct output gaging: Includes 80" connecting cable with 9 pin IBM RS232C connector.

Interchangeable Ball Contact 2 - 6. Sold as a pair.    

Sold as a Pair. Replacement Components Model No. 19234, Pair of Pointed Measuring Tips for Flexbar Digital Multi-Gage.

Flexbar Long Jaw Inside Measurement Caliper Designed for the measurement of Hard-to-Reach Inside Grooves and Dimensions. Features: Measuring Rang...

To design the Anvil head for Slot measurement, the following information is required:  Length of slot to be measured Slot Width Depth of clearance...

Available in two or three point thread measurement heads according to application.

Spherical shaped heads are useful in deep bores where holding the bore gage straight in the bore is difficult, the spherical shapes allows only a s...

Set of Adjustable Depth Stops for Jaw Pair Models (19497/19498/19498-XL).

Set of Inside Dia. Measuring Contacts with 5mm dia. stems.

Set of Outside Dia. Measuring Contacts with 5mm dia. stems.

Set of Clamping Adaptors for measuring Contacts with 5mm dia. stems.

3 Models Available. Base Unit does not include Indicator, Clamp-On Accessories or Contact Points. Order Separately.  -accepts indicators with ⅜"  d...

RS232 SPC Output Cable Common Features: Easy to hold RS232 output Rugged housing Large, LCD display Resolution: .0005"/.01mm Accuracy: µ.0008"/µ.0...