Inspection & Measurement

Blade, Spindle, and Disc Measuring Anvils available. Measuring Range: 0-1"/0-25mm Smooth movement operating lever - push and release to make measur...

Measuring Range: 0-1"/0-25mm Works with most electronic devices through Bluetooth Connection. Smooth movement operating lever - push and release t...

This rugged, yet lightweight micrometer provides quick and easy measurements for ranges up to 2.400"/61mm and will accommodate depths up to 3.3"/83...

Flexbar Snap Gage A U-shaped Go/No-Go gage with hardened, adjustable anvils on opposite ends used to inspect the length of part features. Type: U (...

Flexbar Snap Gage A U-shaped Go/No-Go gage with hardened, adjustable anvils on opposite ends used to inspect the length of part features. Model AR ...

Flexbar Snap Gage Model CS Type "C" 2 Round Buttons and Anvil Check out our latest catalog page.  Ordering Information:

For rapid measurements of metal sheets, wire, plastic, paper, rubber, etc. Graduation .001" Dial face diameter 1⁹/₁₆". Continuous Dial. Throat .50...

Made in Japan Features Features: Gage mounted in hand grooved enameled frame with thumb release mechanism. High grade steel measuring faces. Harde...

Heavy Duty Precision Gage ideal for quick measurements on the shop floor. 6"/150mm Electronic Height Gage with Magnetic Base Travel range: 0-6" (...

12"/300mm and 24"/600mm Available. Resolution: 0.0005"/0.01mm Accuracy: ±0.0015"   Features: Absolute encoding sensor Can be used with digital in...

Available in Bent Stem or Point Stem. The same quality points that make up our deluxe indicator point sets. Available from stock with standard inch...

Pin Vise Accessory for Dial Indicators Allows any A.G.D. dial indicator to hold any diameter probe, needle, etc. 0 to .040" capacity. Uses stan...

Metric to English Conversion Point. 2.5MM to 4/48 inch Conversion Point. Hardened Steel with Black Oxide Plating. A.G.D. 4-48 Thread.

Available in 2½" and 4" Long Bases. Precision ground and hardened depth base accepts any standard AGD Dial indicator with ⅜" stem. Manufactured f...

Features 120° Prismatic Base Ideal for checking cylindrical parts ranging from 10mm/.394" to 100mm/3.94". This "Keyway" base will accept any dial ...

Made in U.S.A. Standard contact points for all AGD standard Dial Indicators with 4-48 threads.All Contacts are Low Carbon Steel, Case Hard, and Bla...

Made in U.S.A. Standard contact points for all AGD standard Dial Indicators with 4-48 threads. All Contacts are Low Carbon Steel, Case Hard, and Bl...

4 Sizes Available Hardened Steel with Black Oxide Plating.A.G.D. 4-48 threads. Model No. 18615 - ¹³/₃₂" Model No. 18616- 1" Model No. 18617 - 1½" M...

PREMIUM QUALITY - Made in Japan. Features Features: One-piece, forged bronze case for strength and durability Nickel-plated case interior and mov...

Made in Japan. Features Extremely Smooth Precision Gears. Inch and Metric Models Features Features: Contact point made of tool steel, hardened gro...

0-0.4 Waterproof Dial Indicator Robust, shockproof design Travel: 1" Reading: .001" Continuous reading: 0-50 Tolerance markers AGD Group 2, 2 ¼" ...

Featuring Unique Combination of Central Lug and Magnetic Back Plate. Each Face Has Dual Scale Continuous & Balanced. Inch and Metric Models Ava...

Individual Dial Indicator Points The same quality points that make up our deluxe indicator point sets. Available from stock with standard inch AGD ...

Individual Dial Indicator Points The same quality points that make up our deluxe indicator point sets. Available from stock with standard inch AGD ...

Special Indicator Contacts Hardened Steel - Black Oxide Finish   Model No. 18567, Chisel Point Indicator Contact. Model No. 18568, Offset Chisel...

Indicator Point Extensions Hardened Steel with Black Oxide Plating. A.G.D. 4-48 Thread.

Set No. 17260, 22 pc Indicator Point Kit Set No. 18614, 11 pc Indicator Point Kit Contains a selection of contact points in styles of half round, f...

Ruby Ball Precision Indicator Contact Tips Precision contact tips manufactured for use on standard drop style dial indicators. Available with Grade...

Carbide Precision Indicator Contact Tips Precision contact tips manufactured for use on standard drop style dial indicators. Available with Grade 2...

Includes .030" Travel Test Indicator & Case. Highly useful for centering holes on milling machines. 3D Articulating Arm Features: ⅜" dia. x 40...

Featuring Direct RS232C Output and Swiss SYLVAC electronics. A sophisticated non-contact linear measuring system...can be connected to any computer...

Advanced Feature Model Offering Dual Analog and Digital Display.   Features: Zero/on/off  - zero setting at any position/manual power on/off Dat...

Flexbar Economy Digital Indicator, 0-1"/25mm Featuring Extra Large Display A Quality General Purpose Indicator at an Affordable Price   Features: ...

1" &  ½" Absolute Indicators 0.00005" Features Features: AGD Group 2, 3/8" stem. Stainless shank and spindle. Display rotates 270°. Top liftin...

Available in 1/2" and 1" indicator sizes, .00016" or .0005" Accuracy, and .00005/0,001mm or .0005/0,01mm Reading. Smart Wireless Connection: connec...

*indicator not included* 3/8" Shank Diameter Double jointed holder fits all dovetail equipped indicators. Mount on either front or rear of instru...

*indicator not included* For use with all Test Indicators and Probes with Dovetails.   Features: 3" Overall Length ¼" Shank diameter Locks in four...

Assorted Test Indicator Holders - Holders for fastening at the dovetail or the stem permits use on any test indicator. Axial Support Bracket Holder...

Fully Jeweled Movement • Auto-Reversing Features Features: Precision quality Adjustable bezel and dial 5/32" and 3/8" diameter mounting shanks Con...

Available in Black Face and Long Point, and 2 Readings/Ranges. Features Features: Auto-Reversing Accuracy meets or exceeds Federal Specifications ...

Manufactured and Inspected at world class factory that produces the highest quality European brands. Three dovetail positioning mounts work with m...

Replacement Battery for Flexbar Digital Electronics 3-Point Internal Micrometers.

Deluxe Waterproof Depth Gage System with Interchangeable Base Attachments and Offset Measuring Attachment *Order Separately Specifications Specific...

DIGI-MET Base Attachments Deluxe Waterproof Depth Gage System with Interchangeable Base Attachments and Offset Measuring Attachment *Order Separat...

Range: 0-6"/150mm Resolution: .00005"/.001mm   Features: Interchangeable stainless rods, .160" dia. Satin Chrome base, 4" L x .640" W, hardened w...