$6.00
Replacement Battery
Replacement Battery for Flexbar Digital Electronics 3-Point Internal Micrometers. Replacement for SKUs 15751-15753.
$6.00
Newest Products
$39.00
Deluxe Micrometer Stand
Adjustable To Any Position Modern styled cast iron stand Lacquer coating Adjustable clamp
$39.00
$109.00
Depth Micrometer Set
0-6" Depth Micrometer Set with .001" Graduations. Features: Base is hardened and ground. Length of base - 4". Hardened and ground screw has 1" m...
View full details
$109.00
$195.00
IP54 Digital depth Micrometer Set
0-6"/150mm Range Resolution: .00005"/.001mm Features: Interchangeable stainless rods, .160" dia. Satin Chrome base, 4" L x .640" W, hardened wit...
View full details
$195.00
$229.00
Digital Multi-Tip Deep Throat Speed Micrometer
Made in U.S.A. A Multi-function, precision measuring instrument -permits use of a wide range of interchangeable tips including points, balls and ...
View full details
$229.00
$219.00
Digital Deep Throat Micrometer with Dual Flat Anvils
A Multi-function, precision measuring instrument -permits use of a wide range of interchangeable tips including points, balls and probes. This rug...
View full details
$219.00
$174.00
Electronic Point Micrometer
Similar Features as Electronic Micrometer models. For measurement of small grooves, keyways & other hard to reach measurements. Large LCD d...
View full details
$174.00
from $124.00
Electronic Micrometers
Available in ranges up to 3"/75mm. Quality Electronic Digital Readout Micrometer Provides Error-Free Readings to .00005"/.001mm. Features: Larg...
View full details
from $124.00
$239.00
IP54 Digital Disc Micrometer
With Disc Measuring Faces for Gear Tooth Measurements Features: Large LCD Display Inch-metric and zero setting at any position SPC output Fricti...
View full details
$239.00
from $95.00
IP54 Digital Micrometers
Available in ranges up to 4"/100mm. Superior Protection Against Water, Coolants, Dust & Oil Features Features: Large LCD Display Inch-metric a...
View full details
from $95.00
$275.00
Specialty Speed-Mic Micrometers
Blade, Spindle, and Disc Measuring Anvils available. Measuring Range: 0-1"/0-25mm Smooth movement operating lever - push and release to make measur...
View full details
$275.00
$175.00
Bluetooth Speed-Mic IP65 Micrometer
Measuring Range: 0-1"/0-25mm Works with most electronic devices through Bluetooth Connection. Smooth movement operating lever - push and release t...
View full details
$175.00
$219.00
Electronic Deep Throat Micrometer
This rugged, yet lightweight micrometer provides quick and easy measurements for ranges up to 2.400"/61mm and will accommodate depths up to 3.3"/83...
View full details
$219.00
from $227.00
"U" Style Snap Gage
Flexbar Snap Gage A U-shaped Go/No-Go gage with hardened, adjustable anvils on opposite ends used to inspect the length of part features. Type: U (...
View full details
from $227.00
from $84.00
AR Model Snap Gage (Type "A")
Flexbar Snap Gage A U-shaped Go/No-Go gage with hardened, adjustable anvils on opposite ends used to inspect the length of part features. Model AR ...
View full details
from $84.00
from $104.00
CS Model Snap Gage (Type "C")
Flexbar Snap Gage Model CS Type "C" 2 Round Buttons and Anvil Check out our latest catalog page. Ordering Information:
from $104.00
$58.00
Economy Pocket Dial Thickness Gage
For rapid measurements of metal sheets, wire, plastic, paper, rubber, etc. Graduation .001" Dial face diameter 1⁹/₁₆". Continuous Dial. Throat .50...
View full details
$58.00
from $139.50
Precision Dial Thickness Gage
Made in Japan Features Features: Gage mounted in hand grooved enameled frame with thumb release mechanism. High grade steel measuring faces. Harde...
View full details
from $139.50
$73.00
Digital Electronic Scale Height Gage with Magnetic Base
Heavy Duty Precision Gage ideal for quick measurements on the shop floor. 6"/150mm Electronic Height Gage with Magnetic Base Travel range: 0-6" (...
View full details
$73.00
from $375.00
Heavy Duty Height Gages
12"/300mm and 24"/600mm Available. Resolution: 0.0005"/0.01mm Accuracy: ±0.0015" Features: Absolute encoding sensor Can be used with digital in...
View full details
from $375.00
from $10.00
Stem Indicator Points
Available in Bent Stem or Point Stem. The same quality points that make up our deluxe indicator point sets. Available from stock with standard inch...
View full details
from $10.00
$33.00
Indicator Pin Vise Accessory
Pin Vise Accessory for Dial Indicators Allows any A.G.D. dial indicator to hold any diameter probe, needle, etc. 0 to .040" capacity. Uses stan...
View full details
$33.00
Save 50%
$19.95
$9.98
Economy Test Indicator Holder
For Milling Machines and Jigborers Test Indicator Holder for Milling Machines. Features: Adapts immediately for fast and positive indicating Sui...
View full details
$19.95
$9.98
Save 50%
$10.00
Metric to English Conversion Point
Metric to English Conversion Point. 2.5MM to 4/48 inch Conversion Point. Hardened Steel with Black Oxide Plating. A.G.D. 4-48 Thread.
$10.00
$185.00
V-Angle Dial Depth Gage Base
Features 120° Prismatic Base Ideal for checking cylindrical parts ranging from 10mm/.394" to 100mm/3.94". This "Keyway" base will accept any dial ...
View full details
$185.00
from $19.00
Button Indicator Contact
Made in U.S.A. Standard contact points for all AGD standard Dial Indicators with 4-48 threads.All Contacts are Low Carbon Steel, Case Hard, and Bla...
View full details
from $19.00
from $25.00
Flat Indicator Contacts
Made in U.S.A. Standard contact points for all AGD standard Dial Indicators with 4-48 threads. All Contacts are Low Carbon Steel, Case Hard, and Bl...
View full details
from $25.00
from $9.00
Tapered Indicator Contacts
4 Sizes Available Hardened Steel with Black Oxide Plating.A.G.D. 4-48 threads. Model No. 18615 - ¹³/₃₂" Model No. 18616- 1" Model No. 18617 - 1½" M...
View full details
from $9.00
from $89.00
Precision Dial Indicators (AGD1)
PREMIUM QUALITY - Made in Japan. Features Features: One-piece, forged bronze case for strength and durability Nickel-plated case interior and mov...
View full details
from $89.00
from $47.50
Premium Quality Precision Dial Indicators (AGD2)
Made in Japan. Features Extremely Smooth Precision Gears. Inch and Metric Models Features Features: Contact point made of tool steel, hardened gro...
View full details
from $47.50
Sold out
$45.00
Waterproof Dial Indicator
0-0.4 Waterproof Dial Indicator Robust, shockproof design Travel: 1" Reading: .001" Continuous reading: 0-50 Tolerance markers AGD Group 2, 2 ¼" ...
View full details
$45.00
Sold out
from $27.00
Flexbar Precision Dial Indicators (AGD2)
Featuring Unique Combination of Central Lug and Magnetic Back Plate. Each Face Has Dual Scale Continuous & Balanced. Inch and Metric Models Ava...
View full details
from $27.00
from $6.50
Conical Indicator Points
Individual Dial Indicator Points The same quality points that make up our deluxe indicator point sets. Available from stock with standard inch AGD ...
View full details
from $6.50
from $5.50
Ball Indicator Points
Individual Dial Indicator Points The same quality points that make up our deluxe indicator point sets. Available from stock with standard inch AGD ...
View full details
from $5.50