Computer Connection Cable/Kit
RS232 SPC Output Cable Common Features: Easy to hold RS232 output Rugged housing Large, LCD display Resolution: .0005"/.01mm Accuracy: µ.0008"/µ.0...
View full detailsRS232 SPC Output Cable Common Features: Easy to hold RS232 output Rugged housing Large, LCD display Resolution: .0005"/.01mm Accuracy: µ.0008"/µ.0...
View full detailsReplacement Battery for Economy Digital Indicator (15828) and Digital Electronic Indicator (15830). This product is Quote Only. Complete form or ...
View full details3 Models Available. Base Unit does not include Indicator, Clamp-On Accessories or Contact Points. Order Separately. -accepts indicators with ⅜" d...
View full detailsSet of Clamping Adaptors for measuring Contacts with 5mm dia. stems.
Set of Outside Dia. Measuring Contacts with 5mm dia. stems.
Precise groove measurements are made easily and accurately. Application requirements for groove width minimum is .060" (1.5mm). Groove depth may no...
View full detailsSet of Inside Dia. Measuring Contacts with 5mm dia. stems.
Spherical shaped heads are useful in deep bores where holding the bore gage straight in the bore is difficult, the spherical shapes allows only a s...
View full detailsAvailable in 3 models with different lengths and depths. Model No. Length Depth 19495 1"/25mm 2mm 19496 1"/25mm 7mm 19496-XL 2.4"/60mm 7m...
View full detailsAvailable in two or three point thread measurement heads according to application.
Available in 3 models with different lengths. All for 4-48 threaded contacts.
Set of Adjustable Depth Stops for Jaw Pair Models (19497/19498/19498-XL).
Available in two or three point thread measurement heads according to application.
To design the Anvil head for Spline measurement, the following information is required: profile drawing of the Spline to be measured with full desi...
View full detailsTo design the Anvil head for Slot measurement, the following information is required: Length of slot to be measured Slot Width Depth of clearance...
View full detailsTo design the Anvil head for Slot measurement, the following information is required: Entry Diameter Length of Component Datum point diameter Min...
View full detailsKit Contains: 2 Caliper Jaw Attachments 8 M 3x3mm Set Screws 1 Hex Key 2 3/4" Flat Measuring Contact 3/4" Pointed Contacts 2 3 3/4" Pointed Contac...
View full detailsEnter your email to receive product updates and newsletters
Copyright © 2024 Flexbar Machine Corporation.