Ideal for use in drafting room, engineering department or in the small shop. Specifications This set has 30 specimens, each are 7/8" x 3/8" compris...
View full details
Thread Wire Attachment System MADE IN USA Description The first new breakthrough in measuring threads using the three wire method in 35 years! I...
View full details
Chrome Steel Hardened To 63RC, Ground and Lapped Certified to Grade 25 accuracy ±.0001" dia., .000025" sphericity* INCH AND METRIC SIZES AVAILABLE ...
View full details
Triga-Bore Heads have a large measuring range and are supplied with fixed anvils eliminating operating error. 24 heads cover .236"-7.87" (6-200mm r...
View full details
Surface Roughness (texture) comparison standards. Made of solid electroformed nickel. Description The largest variety of standards available for a...
View full details
Chrome Steel Hardened To 63RC, Ground and Lapped Certified to Grade 25 accuracy ±.0001" dia., .000025" sphericity* INCH AND METRIC SIZES AVAILABLE
Ideal for accurate measurement of shallow bores, outside diameters, slots and more. Features Features: Made of hardened tool steel, black oxide ...
View full details
Precision grade Gage Ball with affixed threaded stems for use with Dial Gages and Calipers. Description Flexbar is pleased to introduce its new and...
View full details
Easy to use, portable Rockwell hardness testing system. For use in all metalworking facilities. Description A unique, specially shaped file with a ...
View full details
Easy to use, portable Rockwell hardness testing system. For use in all metalworking facilities. Description A unique set of six specially shaped fi...
View full details
Flexbar Snap Gage Model CS Type "C" 2 Round Buttons and Anvil Check out our latest catalog page. Ordering Information:
Details For Engineers, Inspectors, Purchasing Agents HANDY, INEXPENSIVE, USE AS A GIVE-AWAY For Classes on Drafting, etc. ACCURATE - Exact Reproduc...
View full details
Master Setting Ring for Flexbar Triga-Bore™ System. Sizes Available from .2912 in. to 7.6875 in.
Pin Vise Accessory for Dial Indicators Allows any A.G.D. dial indicator to hold any diameter probe, needle, etc. 0 to .040" capacity. Uses stan...
View full details
Flexbar IPD Gaging System Optional Carbide Ball Contact Points. Sold in Pairs.
Accepts head in ranges of: .236-.630" (6-16mm) and .630-7.874" (16-200mm).
Available in 1/2" and 1" indicator sizes, .00016" or .0005" Accuracy, and .00005/0,001mm or .0005/0,01mm Reading. Smart Wireless Connection: connec...
View full details
The Harpenden Skinfold Caliper is a precision instrument designed for use in the performance of Skinfold thickness measurements (from which estimat...
View full details
A quick & easy checking gage for flat workpieces. Ideal for spot or production checking. Pocket size - length is 9¼", weight is 4 oz. Precise ...
View full details
A Quick and Easy Tool for measuring Internal Diameters of Large Pipes, Drums and Other Dimensions ranging from 5" (125mm) to 15" (375mm). Ideal for...
View full details
Made in U.S.A. Standard contact points for all AGD standard Dial Indicators with 4-48 threads. All Contacts are Low Carbon Steel, Case Hard, and Bl...
View full details
Description Shows actual patch mean values certified by the National Institute of Standards and Technology (NIST). Calibrate your surface analyzing...
View full details
Carbide Ball Contact Point Kits (4 or 7 Pairs) Flexbar IPD Gaging System 4 Pair Kit 1/32", 3/64", 1/16", 3/32" diameter covering UN Series threads...
View full details
This rugged, yet lightweight micrometer provides quick and easy measurements for ranges up to 2.400"/61mm and will accommodate depths up to 3.3"/83...
View full details