Cast Microfinish Comparator
9 Specimens provided. Cast surface values for die casting, investment, shell, centrifugal, permanent mold ferrous and non-ferrous, sand and green s...
View full details9 Specimens provided. Cast surface values for die casting, investment, shell, centrifugal, permanent mold ferrous and non-ferrous, sand and green s...
View full detailsComposite Set of 22 Specimens. 5 Machine Finishes - Most Useful Values. Made of Solid Electroformed Nickel - Premium Quality. Inch and Metric Model...
View full details4 Models - Inch and Metric, Turning and Grinding. Made of Solid Nickel. Furnished in attractive vinyl case with instructions. Each model has 10 spe...
View full detailsSurface Roughness (texture) comparison standards. Made of solid electroformed nickel. The largest variety of standards available for assessing and ...
View full detailsDetails For Engineers, Inspectors, Purchasing Agents HANDY, INEXPENSIVE, USE AS A GIVE-AWAY For Classes on Drafting, etc. ACCURATE - Exact Reproduc...
View full detailsDescription This latest addition Precision Reference Standard consists of three specimens formed onto a single gauge. The specimens are identified ...
View full detailsIdeal for use in drafting room, engineering department or in the small shop. Specifications This set has 30 specimens, each are 7/8" x 3/8" compris...
View full detailsDescription Shows actual patch mean values certified by the National Institute of Standards and Technology (NIST). Calibrate your surface analyzing...
View full detailsDescription A Precision, Fully Self-Contained Compact Tester Incorporating An Advanced Microprocessor. Performs data acquisition, data processing a...
View full detailsLifting Lever Attachment for DIGI-Met Indicators, Model Numbers 18318 & 18319.
RS232 SPC Output Cable Common Features: Easy to hold RS232 output Rugged housing Large, LCD display Resolution: .0005"/.01mm Accuracy: µ.0008"/µ.0...
View full detailsReplacement Battery for Economy Digital Indicator (15828) and Digital Electronic Indicator (15830). This product is Quote Only. Complete form or ...
View full details3 Models Available. Base Unit does not include Indicator, Clamp-On Accessories or Contact Points. Order Separately. -accepts indicators with ⅜" d...
View full detailsSet of Clamping Adaptors for measuring Contacts with 5mm dia. stems.
Set of Outside Dia. Measuring Contacts with 5mm dia. stems.
Precise groove measurements are made easily and accurately. Application requirements for groove width minimum is .060" (1.5mm). Groove depth may no...
View full detailsSet of Inside Dia. Measuring Contacts with 5mm dia. stems.
Spherical shaped heads are useful in deep bores where holding the bore gage straight in the bore is difficult, the spherical shapes allows only a s...
View full detailsAvailable in 3 models with different lengths and depths. Model No. Length Depth 19495 1"/25mm 2mm 19496 1"/25mm 7mm 19496-XL 2.4"/60mm 7m...
View full detailsAvailable in two or three point thread measurement heads according to application.
Available in 3 models with different lengths. All for 4-48 threaded contacts.
Set of Adjustable Depth Stops for Jaw Pair Models (19497/19498/19498-XL).
Available in two or three point thread measurement heads according to application.
To design the Anvil head for Spline measurement, the following information is required: profile drawing of the Spline to be measured with full desi...
View full detailsTo design the Anvil head for Slot measurement, the following information is required: Length of slot to be measured Slot Width Depth of clearance...
View full detailsTo design the Anvil head for Slot measurement, the following information is required: Entry Diameter Length of Component Datum point diameter Min...
View full detailsKit Contains: 2 Caliper Jaw Attachments 8 M 3x3mm Set Screws 1 Hex Key 2 3/4" Flat Measuring Contact 3/4" Pointed Contacts 2 3 3/4" Pointed Contac...
View full detailsEnter your email to receive product updates and newsletters
Copyright © 2024 Flexbar Machine Corporation.