$275.00
Specialty Speed-Mic Micrometers
Blade, Spindle, and Disc Measuring Anvils available. Measuring Range: 0-1"/0-25mm Smooth movement operating lever - push and release to make measur...
View full details
$275.00
Products
Request Quote
Spherical or Deep Bore Measurement
Spherical shaped heads are useful in deep bores where holding the bore gage straight in the bore is difficult, the spherical shapes allows only a s...
View full details
Request Quote
Request Quote
Spline Measurement
To design the Anvil head for Spline measurement, the following information is required: profile drawing of the Spline to be measured with full desi...
View full details
Request Quote
from $8.95
Spring Divider
4", 6", and 8" Available. Quality Spring Calipers and Dividers Quick and Positive Adjustment CHROME PLATED FINISH Fully hardened and tempered jo...
View full details
from $8.95
from $89.00
SQ Lathe Chuck Safety Wrench
Description Spring-loaded, self-ejecting chuck wrenches designed for use with lathes and other machines equipped with manually adjusted chucks. S...
View full details
from $89.00
$895.00
Square Shaped Magnetic V-Block
Three Surface Attraction - Sold Singly Ideal for holding round or irregular shapes for scribing or measuring. Needs no conventional clamp down s...
View full details
$895.00
$45.00
Stainless Steel Depth Measuring Base Attachment
Stainless Steel Depth Measuring Base Attachment for Digi-Met Universal Style Calipers.
$45.00
$885.00
Standard Replacement Probe SB51
Standard Replacement Probe: with fore skids for plane or concave surfaces. Ideal to measure at 90°.
$885.00
from $399.00
Stayset Bifurcated Metal Gooseneck Lite-Pipes™
For Use With Flexbar Litesources Use fiber-optic LITE-PIPES™ to solve your lighting problems. Get a BRIGHT beam of COLD light into inaccessible loc...
View full details
from $399.00
from $219.00
Stayset Single Metal Gooseneck Lite-Pipes™
For Use With Flexbar Litesources Use fiber-optic LITE-PIPES™ to solve your lighting problems. Get a BRIGHT beam of COLD light into inaccessible loc...
View full details
from $219.00
from $10.00
Stem Indicator Points
Available in Bent Stem or Point Stem. The same quality points that make up our deluxe indicator point sets. Available from stock with standard inch...
View full details
from $10.00
from $179.00
from $179.00
Stylus Break-Away Electronic Edge Finder
All electronic edge finders will locate work surfaces quickly and easily at almost any angle. Model No. 19336 also "beeps" when stylus meets condu...
View full details
from $179.00
$41.00
Super Jump Edge Finder
Super Jump Edge Finder, 3/8", .200". Made in the U.S.A. The Finest Edge Finders Made Hand Lapped Ultra-Precision
$41.00
from $3.75
Super Power Disc Magnet
4 Models Available. Details Round, disc-shaped configuration. Small, medium & extra large sizes. Zinc plated housing. Ceramic core. Models
from $3.75
$39.95
Super Power ON/OFF Mag Base
On/Off Magnetic Base Super Power Nd-Fe-B Mag Base. Does not include removable flange. Features: Heavy-Duty Housing Permanent Magnets M8 x 1.25mm M...
View full details
$39.95
$195.00
Super Wee Block Set
Smallest V Blocks in the World. Provides maximum bearing surface. Features Precision hardened and ground, Wee blocks are within .0002" in both squ...
View full details
$195.00
from $10.50
Surface Finish Comparator
Details For Engineers, Inspectors, Purchasing Agents HANDY, INEXPENSIVE, USE AS A GIVE-AWAY For Classes on Drafting, etc. ACCURATE - Exact Reproduc...
View full details
from $10.50
from $51.00
Surface Roughness Scales
250 to 2000 Microinches (Available in Metric) Solid electroformed Nickel Reproductions of actual machine surfaces. Overall Dimensions: 1⅜" x 6". 1...
View full details
from $51.00
Sale
from $155.00
Surface Roughness Standards Set – 30 Specimens
Ideal for use in drafting room, engineering department or in the small shop. Specifications This set has 30 specimens, each are 7/8" x 3/8" compris...
View full details
from $155.00
Save 23%
$32.40
$25.00
Table Edge Clamp for High Intensity Cool LED Machine Lighting
Table Edge Clamp for Standard Output Models.
$32.40
$25.00
Save 23%
Request Quote
Taper Measurement
To design the Anvil head for Slot measurement, the following information is required: Entry Diameter Length of Component Datum point diameter Min...
View full details
Request Quote
from $6.00
Tapered Indicator Contacts
4 Sizes Available Hardened Steel with Black Oxide Plating.A.G.D. 4-48 threads. Model No. 18615 - ¹³/₃₂" Model No. 18616- 1" Model No. 18617 - 1½" M...
View full details
from $6.00
$22.50
Tapered/Flat Tips
Pair of Tapered/Flat Tips Replacement Components Model No. 19233, Pair of Tapered/Flat Tips for Flexbar Digital Multi-Gage.
$22.50
from $49.00
Test Indicator Holders
Assorted Test Indicator Holders - Holders for fastening at the dovetail or the stem permits use on any test indicator. Axial Support Bracket Holder...
View full details
from $49.00
from $98.00
The Flexbar® Viseguard™
Quick and easy vise mount Lexan® shield helps to protect machine operators from hot chips and coolant spray at the spindle of your machine. Advanta...
View full details
from $98.00
$28.50
Thin Pour Cartridge (50ml)
Reprorubber® Thin Pour (Green) 50ml Cartridge Clone Any Part Quickly With Reprorubber® Reprorubber® is an exotic metrology-grade rubber that self-c...
View full details
$28.50
$165.00
Thin Pour Cartridges (50ml) - 6 PACK
Reprorubber® Thin Pour (Green) 50ml Cartridge Clone Any Part Quickly With Reprorubber Reprorubber® is an exotic metrology-grade rubber that self-cu...
View full details
$165.00
$1,945.00
Thin Pour Kit - Case of 10, 380ML
IMPORTANT STOCK ALERT: Item is currently on back order. Please allow 2 weeks to be re-stocked. Available in sizes 130ml, 380ml Kit & Case of...
View full details
$1,945.00
$79.50
Thin Pour Kit, 130ML
Available in sizes 130ml, 380ml Kit & Case of 10. Clone Any Part Quickly With Reprorubber® Reprorubber® is an exotic metrology-grade rubber t...
View full details
$79.50
$199.00
Thin Pour Kit, 380ML
Available in sizes 130ml, 380ml Kit & Case of 10. Clone Any Part Quickly With Reprorubber® Reprorubber® is an exotic metrology-grade rubber t...
View full details
$199.00
from $84.00
Thread Base "In-Line" Fine Adjustor
A new top-end, in-line fine adjustor which holds all AGD dial indicators as well as test indicators with dove tail fittings. Flexbar models are now...
View full details
from $84.00
Request Quote
Thread Measurement
Available in two or three point thread measurement heads according to application.
Request Quote
from $67.00
Thread Plug Gages with Handle Class 2B (GO-NOGO)
Description Gages are made in "X" tolerance. Classes 2A and 2B most commonly used for general applications including bolts, nuts, screws, and simi...
View full details
from $67.00
from $97.50
Thread Ring Gage Set Class 2A (GO-NOGO)
Description Gages are made in "X" tolerance. Classes 2A and 2B most commonly used for general applications including bolts, nuts, screws, and simi...
View full details
from $97.50
$49.00
Thread Wire Measuring Set (Made in the U.S.A.)
Thread measuring wires accuracy is .00008" Includes 48 wires in 16 different sizes Measures all U.S. 60° threads Laminated conversion chart for 60...
View full details
$49.00
from $54.50
Tom Thumb Arm ONLY
Ideal for very tight work areas. Precision engineered. Universal flexible arm locks into an extremely rigid position by turning knob. Supports up t...
View full details
from $54.50
$97.50
Tom Thumb with Mag Base
Tom Thumb Arm Mounted on Pot Mag. Base: 1⅛" dia. x 1⅜" high 25lbs. pull 5" post with fine adjustor. Ideal for very tight work areas. Precision...
View full details
$97.50
Request Quote
Top Cover Guard
This product is Quote Only. Complete form in tab below or Call +1(800) 879-7575 to order. Top cover guard for drill press belt/pulley guard.
Request Quote
from $2,295.00
Totalguard™
Description SLIDE AND SWING ASIDE MILLING MACHINE GUARDS FULLY ADJUSTABLE FOR VERTICAL, HORIZONTAL AND C.N.C. MILLS Available in three sizes to fit...
View full details
from $2,295.00
Request Quote
Totalguard™ Vise Panel
This Clear Panel Covers The Gap Left When The Two Front Panels Cannot Be Closed Completely Due To A Protruding Vise As Shown. The Guard Simply Hoo...
View full details
Request Quote
$27.00
Transfer Punch Set
Description Transfer Punch Set is used to tightly fit the tolerances of an existing hole and, when hit, precisely transfers the center of that hole...
View full details
$27.00
from $385.00
Travelguard™
Cross Slide Type Description Point of operation guard for lathes to keep the operator shielded from chips and debris. Extra heavy duty for lathes, ...
View full details
from $385.00
from $360.00
Triga-Bore™ 3-Point Gage Heads
Triga-Bore Heads have a large measuring range and are supplied with fixed anvils eliminating operating error. 24 heads cover .236"-7.87" (6-200mm r...
View full details
from $360.00