Available in N-Diamond 15Kg (Round) HR15Ns from 72 to 91.5. Manufactured from the highest quality steel with a special heat treat and cold treat...
View full details
Available in A-Diamond 60Kg (Round) HRAs 28.5 to 83. Manufactured from the highest quality steel with a special heat treat and cold treat process...
View full details
Available in 1/16 Ball 100Kg (Square) HRBs 35 to 95. Manufactured from the highest quality steel with a special heat treat and cold treat process...
View full details
Available in C-Diamond 150Kg (Round) HRCs 25 to 63 Manufactured from the highest quality steel with a special heat treat and cold treat process w...
View full details
Flexbar Snap Gage A U-shaped Go/No-Go gage with hardened, adjustable anvils on opposite ends used to inspect the length of part features. Type: U (...
View full details
Save 50%
Carbon-Chrome Steel-Grade 2 (+.000004/-.000002) Each block is supplied with serial number and individual N.I.S.T. Traceable Certificate.
Save 75%
Made in Japan Features: Gage mounted in hand grooved enameled frame with thumb release mechanism. High grade steel measuring faces. Hardened stain...
View full details
Save 50%
Easy reading 45° LCD Display Conversion between absolute and relative measurement Hold function to freeze measurements Auto off Backlight func...
View full details
Supplied in Matched Pair Hardened in RC 58-60 Precision Ground Surface Finish to 6-10 microinches Dimensions: 1" x 2" x 3" Squareness: ±.0002"
Save 40%
USA Made - Matched Pair. For precision grinding, layout,etc. Drilled Hole Size: .500 ~ .501 Accuracy with Squareness on all sides within .0001 per...
View full details
Sold as Matched Pair, or Matched Set of 3. Made of hardened steel, precision ground on all six sides to ± .0001" squareness per inch. To size with...
View full details
Save 75%
10 Leaf Set: .0015", .002", .003", .004", .006", .007", .010", .012", .015" and .025" (Length 4"). Special Features: Each leaf of the Tapered Th...
View full details
Features Quick easy and extremely accurate Blocks come with a certificate of calibration to NIST Complete with aluminum carry case Includes Set I...
View full details10 Point Certification for Type A and Type D (Model Nos. 20705 & 20706)
Save 50%
Inspection Square 10"x10", Sensitivity .0005" Stabilized cast iron with hardened surfaces. 2 sides with flat bearing surfaces and 2 sides with fl...
View full details
8 LED's vividly illuminate the Field of View. Details Includes a photo etched glass reticle #2 scale covering a wide range of measurement applicati...
View full details
Sold in heavy duty case. Set includes 9 reticles: 1,2,3,7,8,9,10,11,13 8 LED's vividly illuminate the Field of View. Details Includes a photo etche...
View full details
Sold out
Deluxe Pocket Optical Comparators 7X and 10X Series The scales are Photo etched into a glass reticle which is placed in actual contact with the mea...
View full details
Save 50%
12"/300mm Digi-Met Prisma Caliper complete with fitted case and Certificate of Calibration Traceable to N.I.S.T.Special Prismatic Guide Constructio...
View full details
Sold out
Setting preset value Zero setting at any position Accuracy 0.008° or 30" 3 measurement patterns (1 x 360°, 2 x 180°, 4 x 90°)
Save 50%
Graduation: 0.0005" per 10". For accurately checking the work of machinists and toolmakers setting up machinery and other work that requires extrem...
View full details
Save 21%
Ideal for Use with Flexbar Digi-Zoom and SMZ Series Microscopes. Vertical Pole Diameter 1.4"/36mm Focusing pole diameter 1.25"/32mm Max. Distance ...
View full detailsOptional Accessory for the Flexbar Bench Top Hardness Tester Rockwell Type, Model
12V direct wire wall transformer with on/off switch - 8ft. cable for Models 13170, 13172. 13180-13184
12V rechargeable battery pack, jumper cable, velcro set and 12V charger for Models 13171, 13173,13185-13189
Replacement Cables for Flexbar® Model No. 80060-2, 2 Ball Cable for Flexbar® Models 18026-18038, 18051, 18058-18063, 11014.
Replacement Cable for Model No. 18039 & 18040 (Jumbo Flexbar®). Long 2-Ball Cable for Jumbo Flexbar® Models.
Save 40%
LOGIC-Basic: This model is designed to meet the basic measuring needs of a wide range of users and applications, while incorporating the advanced t...
View full details
Matched Pair - Import Precision ground and hardened on all sides Blocks are matched within .0002" and measure 2" x 4" x 6" Squareness: .0001" Para...
View full details
This 2-Panel expansion kit comes with extra slide-in expansion hinge.
Metric and Decimal Sets Available Piece Set With holder, .010", .015", .020", .025", .030" to .100" in increments of .010", .120" to .220" in incre...
View full details
25 Piece Set With holder 1/64" to 17/64" in increments of 64ths and 9/32" to ½" by 32nds. Made of rust-proof steel, satin chrome finish. Each g...
View full details
Save 50%
32 to 82 Pitch Standard V Thread Screw pitch gages are made of the finest steel available. Precisely ground and finished. A durable tool which pro...
View full details
Metric and Decimal Sets Available. 26 Piece Set With holder, 0.5mm to 13mm in 0.5mm increments. Made of rust-proof steel, satin chrome finish. Eac...
View full details
Shield Size: 6" W x 6" H x 4" D FEATURING A NEWLY DESIGNED UNIVERSAL POSITIONING SYSTEM INCORPORATING A RANGE OF ELECTRICAL INTERLOCKED SHIELDS FOR...
View full details
4" or 6" Radius available. 6¼" Height. FEATURING A NEWLY DESIGNED UNIVERSAL POSITIONING SYSTEM INCORPORATING A RANGE OF ELECTRICAL INTERLOCKED SHI...
View full details
FEATURING A NEWLY DESIGNED UNIVERSAL POSITIONING SYSTEM INCORPORATING A RANGE OF ELECTRICAL INTERLOCKED SHIELDS FOR A WIDE VARIETY OF MACHINE GUARD...
View full details
Please note: When using extension, you must have entrance diameter of .710". For use with 13290 and 13295 Videoborescope Systems only
Description This latest addition Precision Reference Standard consists of three specimens formed onto a single gauge. The specimens are identified ...
View full details
Optional extension tube for Flexbar 3-Axis Universal Mount Interlocked Guards. Can be cut to desired length.
Save 50%
Countersink Gage, 30 Angle, .360"-.560" Capacity Use the countersink gage to measure the diameter of countersinks and chamfers directly in .002" or...
View full details
Available in 2 sizes with a choice of 9" x 12" or 12" x 18". Toolroom Grade B Granite Bases. Features Arms can be positioned and fixed easily and ...
View full details
Includes .030" Travel Test Indicator & Case. Highly useful for centering holes on milling machines. 3D Articulating Arm Features: ⅜" dia. x 40...
View full details
4-Quadrant LED Ring Light with 10-Step Variable Intensity Control 72 LED bulbs with 10-step variable intensity light control Sectional lighting co...
View full details
Description Made of tool steel hardened to Rc 58-62 and ground in matched pairs on four sides for use where extra precision is required. Pairs are...
View full details
