Autostic Can

SKU 15001

Available in Thin, Standard, and Thick viscosity.


A ceramic inorganic compound is a major advance over the 2-part epoxy resin type adhesives. Almost limitless applications in a wide range of industries. Adheres to Keyless Surfaces, e.g. Polished Glass to Polished Silver. Withstands reverse stresses at all temperature variations.

  • It bonds
  • It's a filler
  • It's a coating
  • It's a heat and abrasion barrier

Impervious to oil, gasoline, acids and alkalies including concentrated sulfuric acid - has low thermal conductivity. Excellent electrical insulation for all voltages whether AC or DC and up to 20 radio MHz. Coat electrical windings for motors (replacing shellacs).

Safety Data Sheets (SDS)/ Literature

Thin (Spray On)_15001

Standard (Brush On)_15002

Thick (Trowel On)_15003

Autostic Brochure


Moldability: Can be molded using polyethylene, teflon or nylon molds from inert-high density plastics. Can be machined, milled, drilled, tapped, sawcut, mold with additives such as mica dust providing additional insulating properties.


Coats glass to withstand higher temperatures - glass to metal- glass to ceramics- metal to metal - asbestos to glass- ferrite to ferrite - glass to ferrite - carbon to metal - sealing castings - gas joint sealing - electric muffle linings- solder mask-fuse coatings - masks for heat treating furnace kilns - coats brick and mortar - coke burning appliances . Instrument Assemblies - Fill in cracks in stoves: thermocouples - brake linings - Quartz to Metal - Induction coils - thermocouples coating - magnets - potting- insulators- thermocouples - repair tube furnaces - high temperature caulking - coat wooden patterns - WILL NOT ATTACK ANY METALS.

  • Electrical
  • Domestic Appliances
  • Electronics
  • Coal Mines
  • Manufacturers of Stoves
  • Furnace & Boilers
  • Glass Manufacturers
  • R & D
  • Gas Appliances
  • Ceramics to Metal.

Manufacturing, Fireproof, Bulkhead Panels On Ships, Fireproofing, Building Materials Panels, Ceiling Tile, Etc.Acid Tanks - Kilns - Chemical Sewers.

Independent Tests prove the strength of Autostic

  • Tensile Strength: 250 lbf/in2 (1.75Nmm2)
  • Shear Strength: 450 lbf/in2 (3.15Nmm2)
  • Dampens noise and vibration to less than 80 decibles - Autostic has degree of flexibility
  • Absolute safe
  • No health hazards
  • Low Shrinking ... Less than 1%