Filters

Flexbars

Instant positioning, instant locking. Our heavy duty FLEXBAR is completely flexible allowing you to reach over, under, around with ease and precision.

Our positioning arms eliminate the need for a large assortment of rods, swivels, clamps and other hardware necessary to reach and measure in obstructed areas. Cut your setup time as much as 75% to 90% with the use of positioning arms.

Check out the latest catalog pages for our complete line of Flexbars.

Original Flexbar®
from $59.00

Original Flexbar®

The heavy duty FLEXBAR is completely flexible; lets you reach over, under, around, instantly and surely. Elimination of the large assortment of rod...

View full details
from $59.00
Original Flexbar® on V-Bottom Mag Base
from $84.50

Original Flexbar® on V-Bottom Mag Base

Flexbar on V-Bottom Magnetic Base with or without fine adjustor rod. 18038 - Base 2" x 2¼" x 2⅝" with fine adjustor.

from $84.50
Original Flexbar® on C-Clamp
$69.00

Original Flexbar® on C-Clamp

Original Flexbar on C-Clamp. C-Clamp: 1⅜" Vertically. Throat to Center of Screw - ¾".

$69.00
Original Flexbar® on Disc Mag Base
from $56.00

Original Flexbar® on Disc Mag Base

Flexbar® on Disc Mag Base (34800) 3⅛" diameter, 100lb. pull. With or Without Fine Adjustor Rod. Features Top Mounting Clamp ("B"): (Telescopic A...

View full details
from $56.00
Original Flexbar® Mag Base with Fine Adjustor sold with 1" Indicator
$130.00

Original Flexbar® Mag Base with Fine Adjustor sold with 1" Indicator

Description The heavy duty FLEXBAR® is completely flexible; lets you reach over, under, around, instantly and surely. Elimination of the large as...

View full details
$130.00
Original Flexbar® on C-Clamp with 1" Indicator
$76.50

Original Flexbar® on C-Clamp with 1" Indicator

Original Flexbar on C-Clamp with 1" Dial Indicator (.001" Graduations). C-Clamp: 1⅜" Vertically. Throat to Center of Screw - ¾".  

$76.50
Jumbo Flexbars®
from $108.00

Jumbo Flexbars®

Two models: on Flange or Powerful Magnetic Base. Description Heavy-Duty Flexible Holding Device Cam-lever locking, extra heavy cable. Extra heavy ...

View full details
from $108.00
Flexbar® Rigid Arm Vise-Grip Kit
$164.00

Flexbar® Rigid Arm Vise-Grip Kit

The Flexbar Rigid Arm Vise-Grip Indicator Kit features an extremely rigid holding arm. A single knob locks both the arm and the indicator into posi...

View full details
$164.00
Flexbar® Rigid Arm Vise-Grip Only
$110.00

Flexbar® Rigid Arm Vise-Grip Only

Includes Arm and Vise-Grip Only. The Flexbar® Rigid Arm Vise-Grip Indicator features an extremely rigid holding arm. A single knob locks both the a...

View full details
$110.00
Flexbar® Vise-Grip Only
$109.00

Flexbar® Vise-Grip Only

Includes Flexarm and Vise-Grip (indicator not included).

$109.00
Flexbar® Vise-Grip Indicator Kit
$154.00

Flexbar® Vise-Grip Indicator Kit

Attaches to any convenient object. Indicator Kit Includes: Flexbar® No. 18030 Vise-Grip No. 7 CR (curved jaws) with saddle mount block No. 12001,...

View full details
$154.00
Universal Cam Lever Flexbar® on Vacuum Base
$234.00

Universal Cam Lever Flexbar® on Vacuum Base

Ideally suited for benchtop, granite surface plates or precision flat surfaces. The heavy duty FLEXBAR® is completely flexible; lets you reach over...

View full details
$234.00
Universal Cam Lever Flexbar® on Weighted Base
$119.00

Universal Cam Lever Flexbar® on Weighted Base

Ideally suited for benchtop, granite surface plates or precision flat surfaces. The heavy duty FLEXBAR® is completely flexible; lets you reach over...

View full details
$119.00
V-Bottom Mag Base "In-Line" Fine Adjustor
from $105.00

V-Bottom Mag Base "In-Line" Fine Adjustor

Magnetic Base for In-Line fine adjustor. Base has a v-bottom which supports Flex Arm.

from $105.00
Thread Base "In-Line" Fine Adjustor
from $84.00

Thread Base "In-Line" Fine Adjustor

A new top-end, in-line fine adjustor which holds all AGD dial indicators as well as test indicators with dove tail fittings. Flexbar models are now...

View full details
from $84.00
Tom Thumb with Mag Base
$97.50

Tom Thumb with Mag Base

Tom Thumb Arm Mounted on Pot Mag. Base: 1⅛" dia. x 1⅜" high 25lbs. pull 5" post with fine adjustor. Ideal for very tight work areas. Precision...

View full details
$97.50
Tom Thumb Arm ONLY
from $54.50

Tom Thumb Arm ONLY

Ideal for very tight work areas. Precision engineered. Universal flexible arm locks into an extremely rigid position by turning knob. Supports up t...

View full details
from $54.50
Off-The-Post Clamp Model with Mag Base
from $79.50

Off-The-Post Clamp Model with Mag Base

Flexbar® with mag base with or without fine adjustor. On/Off Mag Base - 2" x 2¼" x 2 ⅝" Details Instruments held by Flexbar® do not drift. Instan...

View full details
from $79.50
Off-The-Post Jumbo Flexbar® on Weighted Base
$115.00

Off-The-Post Jumbo Flexbar® on Weighted Base

IDEALLY SUITED FOR BENCHTOP AND LABORATORY USES. Jumbo Flexbar® on 6' post with mourning flange on Weighted Base.

$115.00
Off-The-Post Flexbar® on Vacuum Base
$162.00

Off-The-Post Flexbar® on Vacuum Base

The heavy duty FLEXBAR® is completely flexible; lets you reach over, under, around, instantly and surely. The Off-The-Post Flexbar® on a Vacuum bas...

View full details
$162.00
Off-The-Post Flexbar® on Weighted Base
$139.00

Off-The-Post Flexbar® on Weighted Base

Ideally suited for benchtop, granite surface plates or precision flat surfaces. The heavy duty FLEXBAR® is completely flexible; lets you reach over...

View full details
$139.00
Off-The-Post Clamp Model with Post Clamp
$82.00

Off-The-Post Clamp Model with Post Clamp

Flexbar® without mag. base. Post clamp fits ½" dia. post. Other sized post clamps supplied upon request. Details Instruments held by Flexbar® do...

View full details
$82.00
Off-The-Post NEW "In-Line" Fine Adjustor Models
from $124.00

Off-The-Post NEW "In-Line" Fine Adjustor Models

Off-The-Post Flexbar® "In-Line" Fine Adjustor Models available with or without Mag Base, Single or Dual Axis, and all with Fine Adjustor. 19070 &am...

View full details
from $124.00
Off-The-Post Jumbo Flexbar®
from $115.00

Off-The-Post Jumbo Flexbar®

13" Arm. Available options include arm only, on 6" post with mounting flange, on 6" post with fine adjustor on Large On/Off Level Magnetic Base (4¹...

View full details
from $115.00
Off-The-Post Jumbo XL Flexbar®
from $139.00

Off-The-Post Jumbo XL Flexbar®

15" Arm. Available options include arm only, on 6" post with mounting flange, or on 6" post with fine adjustor on Large On/Off Level Magnetic Base ...

View full details
from $139.00
Off-The-Post Jumbo XXL Flexbar® Arm Only
$179.00
Off-The-Post Jumbo "In-Line" Fine Adjustor Model Flexbar®
from $129.00

Off-The-Post Jumbo "In-Line" Fine Adjustor Model Flexbar®

Description The fine adjustment assembly is actuated by a very smooth micro-screw thumb adjustor making the Flexbar ideal for high precision indica...

View full details
from $129.00
Long Reach Jumbo Flexbar® Clamp with 2" Kant-Twist Clamp
from $250.00

Long Reach Jumbo Flexbar® Clamp with 2" Kant-Twist Clamp

LONG REACH JUMBO FLEXBAR® CLAMP WITH 2” KANT-TWIST CLAMP  42" Total Reach  29" Total Boom Length  180lb. Magnetic Base  12" x ¾" main post   ...

View full details
from $250.00
Flexbar® Extra Hand Mini with 1" Kant Twist Clamp
$74.00

Flexbar® Extra Hand Mini with 1" Kant Twist Clamp

For Smaller more precise applications. This holding device has the same rugged, visegrip, but with a 1" Kant-Twist™. T-Handle clamp.

$74.00
Flexbar® Extra Hand Dual Arm (2" Capacity)
$75.00

Flexbar® Extra Hand Dual Arm (2" Capacity)

Extra Hand Dual Clamp Fixturing Arm with 2" Kant-Twist Clamp. This dual clamp single arm holding device clamps on rounds, flats, anything. Feature...

View full details
$75.00
Flexbar® Add-a-Clamp Kit
$39.50

Flexbar® Add-a-Clamp Kit

Flexbar® Add-A-Clamp Attachment Kit, includes 0-1" Kant Twist C-Clamp and bolt connector to connect with Flexbar® distal end "B" Universal Clamp. C...

View full details
$39.50
Float 'N Lock
from $39.95

Float 'N Lock

Description Model Types: 18001 - Basic Unit with Bottom Hole for mounting, ⅜-16 NC-Class 28. 18001-S - Basic Unit with ¼ - 20 Threaded Post, No Fla...

View full details
from $39.95
Anyform Mag Base with Flexbar® Arm
$125.00

Anyform Mag Base with Flexbar® Arm

Anyform Magnetic Base with Flexbar® Arm Model No. 18031 with Fine Adjustor Universal Rod. 70 steel segments independently align and attach themse...

View full details
$125.00
Flexbar® C-Clamp
$10.00

Flexbar® C-Clamp

Flexbar® C-Clamp. Heavy Duty Cast Iron-Zinc plated. ¼ -28 Top Mounting Thread. Capacity of C-Clamp: 1⅜" Vertically. Throat to Center of Screw -...

View full details
$10.00
Universal Clamp Assembly
$15.00

Universal Clamp Assembly

3-piece holding unit for all standard Flexbar® stands.

$15.00
Ball & Thread Cable
$20.00
Ball & Thread for Jumbo
$32.00

Ball & Thread for Jumbo

Replacement Cable Ball & Thread for Jumbo Flexbar models 18041 and 18044 (includes easy instructions for replacing cable).

$32.00
Ball & Thread for Jumbo XL
$32.00

Ball & Thread for Jumbo XL

Replacement Cable Ball & Thread for Jumbo Flexbar models 18041-XL TO 18043-XL.

$32.00
2 Ball Cable for Flexbar®
$13.75

2 Ball Cable for Flexbar®

Replacement Cables for Flexbar® Model No. 80060-2, 2 Ball Cable for Flexbar® Models 18026-18038, 18051, 18058-18063, 11014.

$13.75
2 Ball Cable for Jumbo
$19.00

2 Ball Cable for Jumbo

Replacement Cable for Model No. 18039 & 18040 (Jumbo Flexbar®). Long 2-Ball Cable for Jumbo Flexbar® Models.

$19.00
Replacement Cable for 18052
$13.00
Short Cable
$12.75

Short Cable

Ball & Thread Cable for Tom Thumb Flexbar Models 18009 & 18050.

$12.75
Dovetail Swivel Clamp
from $36.00

Dovetail Swivel Clamp

Description Flexbar Adjustable Swivel Clamps Anti-Vibration Lock. Provides Positive, Rigid Holding Power. Specifications

from $36.00
Large Model Swivel Clamps
from $31.00

Large Model Swivel Clamps

Description Flexbar Adjustable Swivel Clamps Anti-Vibration Lock. Provides positive, rigid holding power. Specifications

from $31.00
Medium Model Swivel Clamps
from $21.00

Medium Model Swivel Clamps

Description Flexbar Adjustable Swivel Clamps Anti-Vibration Lock. Provides Positive, Rigid Holding Power. Specifications

from $21.00