LATHEGUARD,MEDIUM/LARGE
|
|
|
|
|
Model #:
13062
THE FLEXBAR LEXAN LATHEGUARDPrevent Accidents With LATHEGUARD Clear LEXAN, Semi-Circular Wrap-a-round Guards
Heavy Duty Cast Mounting bracket supplied.
Heavy Duty Chrome-plated extension tube and hardware.
Ready to mount; all you do is affix mounting bracket with two screws.
Back of shield is reinforced with plated wire-form housing.
Locks in swing away or functional positions.
Accepts 3 or 4-Jaw Chucks.
Information and Specifications
HINTS, FOR SELECTING THE CORRECT LATHEGUARD!
- The Chuck Diameter being used on your Lathe makes for a good formula.
-
Utilize Dimension "A" and other dimensions given in chart shown on Page 5 of our Safety Catalog. See our Home Page to link to our Safety Catalog.
-
On Lathes with center heights of 7 inches or more there is a significant variation in the diameter of a 3-Jaw as against a 4-Jaw Chuck. It may be necessary to install the next larger Latheguard to accommodate for the 4-Jaw Chuck. Keeping a double bracket (No. 13071) on the Lathe makes it possible to switch your latheguard from small to larger size and vice versa, in one minute.
NEITHER RAZOR-SHARP CHIPS NOR BROKEN TOOLS BITS WILL PENETRATE THE LEXAN SHIELD
Model No. 13062 suggested Lathe size is 16 to 20 for use with Chucks up to 16" Diameters. |
|
|
|
LATHEGUARD,MEDIUM/LARGE
|
|
|
|
May we also suggest...
|
Check the check boxes next to the additional products that you would like to add to the shopping cart, then click on the "Add to Cart" button above. A check box is not shown if a product requires that you select an option or fill out a field. ( ) indicates a required accessory.
|
|
|
|
|
|
|
0 Items(s), $0.00
