Flexbar®

Universal Holding / Positioned

Instant Positioning-Instant Locking
UNIVERSAL HOLDER/POSITIONERS FOR ALL AGD INDICATORS AND ELECTRONIC SENSORS (Lug Backs Too!)

The heavy duty FLEXBAR is completely flexible; lets you reach over, under, around, instantly and surely. Elimination of the large assortment of rods, swivels, clamps and other hardware necessary to reach and measure in obstructed areas. Cuts set-up time as much as 75% to 90%. FLEXBAR sets and locks with a simple twist of the lever.

• Top Mounting Clamp ("B"): (Telescopic Action) Grips objects from .125" up to .510" diameter.
• Cable and swaged fittings are stainless aircraft and Mil Spec Grade.
• Locked by Tensioning of Cable, incredible rigidity is achieved by this design. (No Movement once locked).
• Cam Action Locking.

Flexible Arm has 14 Balls & Sockets and When Flexed
Can turn a 2 1 /2" Dia. Circle; Above Units support 3 Lb. Payload. Back Oxide Finish.
On/Off Mag Base: 1 5 /8" x 1 7 /8" x 2" High (approx.).
Pushbutton Type.

Replacement Cables for Flexbars:

Model No. 80060-2,
2 Ball Cable for Flexbar Models

• 18026-18038
• 18051
• 18058-18063
• 11014

VARIETIES OF FLEXBARS
Height	Base Feature	Magnet Pull (lbs)	Model No.	Notes
14"	Fine Adjustor	None	18026	Fine Adjustor No Magnet
15"	Mag Base	65 On/Off	18027	No Fine Adjustor
16"	Mag Base with Fine Adjustor	65 On/Off	18028	See Picture(Top Left)
13"	5/16-18 Thread	None	18030	See Picture (Top Right)
13"	8mm x 1.25 Thread	None	18031	See Picture (Top Right)

Flexbar on Disc Mag Base 34810 Model No. 18033 Base 3 1/8" dis., 100 lb.pull. With Fine Adjustor Rod Model No. 18037 Base 3 1/8" dis., 100 lb.pull. Without Fine Adjustor Rod Flexbar on V-Bottom Mag Base Model 18038 Base 2" x 2 1/4" x 2 5/8". With Fine Adjustor Rod. (Same Flexbar as on Models 18026-18031 but top end has fine adjustor universal-5 1/2" long for easy adjustment in any plane. Total reach 22". On/Off Mag Base with V on Bottom. Model No. 18035 Base 2" x 2 1/4" x 2 5/8". Without Fine Adjustor Rod.