Facsimile Casting Material

Shop This Product Now

QUICK-SETTING COMPOUND

MAKES ACCURATE HARD PLASTIC REPRODUCTION IN 6 TO 8 MINUTES

Facsimile® is a special plastic compound kit which is used for duplicating surface flats, roughness and for dimensional transfer of inaccessible locations. Many other applications are listed below and many more in our free 24 page applications booklet.

Make duplicates for measuring, such as gages, etc.
Mask, fill in and seal.
Test surface geometry, flatness, microfinish, etc.
Fretting depth of blade dovetails in jet engines.
Make permanent records of surface geometry, etc.
Make potting, bonding and repairing easy.
Make custom holding and nesting fixtures.
Make quick jigs.
Make instant molds and patterns.
Make excellent stylus patterns.
Closer inspection can be performed by allowing the casting to cure in a pressure vessel (15 p.s.i.).
When casting in a "CONFINED” area, it is better to cast 1 /2 of the internal shape.
Facsimile® will not affect the surface of ferrous or non-ferrous materials to which it is applied.
Remember—when casting without releasing agent, an ACETONE soak removes Facsimile®.
Cast small run parts and prototypes.
 
 

AVAILABLE IN LARGER "ECONOMY" KITS


TECHNICAL DATA
A test submitted by E.I. Dupont DeNemour & Company to an independent test lab showed the following properties of Facsimile®:
TEST PIECE APPROXIMATELY 1” BY 1 /4” THICKNESS...
COMPRESSION TEST...Maximum load 6,800 lbs. Compression strength 9,650 PSI.
MECHANICAL PROPERTIES...Ultimate tensile 3,415 PSI.
WATER ABSORPTION...(24 hours at 73 o ) 0.31% by weight.
The kit contains all material and instructions. The Facsimile® can be diluted from a putty consistency to a watery to best suit your job needs. If larger quantities of Facsimile® are desired they can be ordered in 3 lb. and 25lb. kits at proportionately lower prices per pound.


Facsimile® is Made in U.S.A.

APPLICATIONS AND TECHNICAL INFORMATION

USE #1: To create a master or checking gage, just pour in facsimile and wait 6 to 8 minutes. Parts later can be conventionally ground, machined, etc., if desired. Drawing above shows creation of a thread gage. USE #2: Shown above is a quick and inexpensive method of creating a drill fixture. Just pour facsimile around drill bushings and wait 6 to 8 minutes. Casting must be a thick section 3/8” or more. USE MAGNETS TO HOLD PLATES. USE #3: Without removing work from the machine set-up you can create a "facsimile” test sample which can be carried away for testing. Duplicates from 3 to 1,000 Micro inches perfectly.
USE #4: Used for checking radii and angular internal and external recesses, often in difficult to measure areas. USE #5: Optical projections of forms made with "facsimile” are duplicates within millionths! USE #6: Highly accurate and reliable casted replicas of internal thread forms are not only possible but they are being performed daily by facsimile users the world over.

Facsimile® is 100% Government approved for ANTI-CONTAMINATION and all ATOMIC and NUCLEAR APPLICATIONS by virtue of not containing (even traces of): All Halogens–Mercury–Sulphur–Lead–Copper–Brass–Phosphorous–Zinc–Arsenic–Antimony–Aluminum–Cadmium–Tin–Bismuth–Boron or any compounds thereof. CERTIFICATES WILL BE PROVIDED.


ORDERING INFORMATION:
INTRODUCTORY KIT

One Lb. Kit No. 16000 Complete Kit Contains:
FACSIMILE POWDER, 1 lb. Troy
01 - 120cc FACSIMILE liquid
01 - 60cc Flexbar Release Agent
01 - Powder scoop
01 - Molding clay
10 - Disposable cups (graduated)
10 - Wooden spatulas
01 - 1 oz. polypropylene measuring cup


COMPLETE KITS*
16000 1 lb. Kit FACSIMILE
16003 3 lb. Kit FACSIMILE*
16025 25 lb. Kit FACSIMILE

Introductory Kit-1 lb kit No. 16000


Click Here to download.

REFILLS FOR FACSIMILE KITS Order No.

16200 60cc Release Agent, soap based
16201 Pint Release Agent, soap based
16202 1 lb. Jar Facsimile Powder
16203 3 lb. Jar Facsimile Powder
16204 25 lb. Drum Facsimile Powder
16205 120cc Bottle Facsimile Liquid
16206 Pint Can Facsimile Liquid
16207 Quart Can Facsimile Liquid
16208 Gallon Can Facsimile Liquid
16209 100 ea. 3 oz. Paper Cups Graduated
16210 100 ea. 1 oz. Paper Cups Graduated
16211 25 ea. 6-1/2 oz. Plastic Cups Graduated
16212 100 ea. Sticks, Mixing, Narrow
16213 1 lb. Bar Molding Clay
16214 100 ea. Sticks, Mixing, Wide
16914 60cc Release Agent, oil based
16915 Pint Release Agent, oil based

For Air Shipments, EXTRA CHARGE for D.O.T. Approved. Containers and Overpacking for Facsimile Liquid only.



NEW-SUPER RELEASE AGENT

EPOXY PARFILM ULTRA
Order No.16136, Epoxy ParFilm, 18 ounce spray


A NEW and Highly Effective Release Agent for users of Facsimile "measure image". NON-CFC, NON-VOC Formula. Epoxy ParFilm is the culmination of a search for a suitable release agent for epoxies. The highly effective, very thin film obtainable from Epoxy ParFilm Release is non-melting and will not carbonize. This makes it suitable for use with exothermic cures, such as Facsimile "measure-image" replication compound.

  • Epoxy ParFilm offers better release than polyvinyl alcohol and wax with a much thinner film application.
  • Epoxy ParFilm can be applied quickly with the easily operated directional valve which is standard.
  • Epoxy ParFilm is non-combustible, non-toxic and non-allergenic. Contains NO CHLORINATED SOLVENTS.
Important Notice to Users of REPRORUBBER by Flexbar:
SEPARATION OF REPRORUBBER NOW POSSIBLE WHEN CASTING REPRORUBBER FROM REPRORUBBER.

For Reprorubber® Thin Pour and Facsimile® Users

MONOJECT PRECISION DISPENSING SYRINGES

Provides User With An Easy Method Of Injecting Pre-Mixed Reprorubber or Facsimile Into Small Holes, Grooves or Small Spaces. 10cc capacity syringes are easily filled and disposable once used. .060” dia. curved tip for injecting Reprorubber or Facsimile into small holes. Tip can be cut to allow greater flow. Sold in low cost packages of 10 each.


Model No. 16190, Monoject 10cc Syringe Pac (10 each)

Shop This Product Now
Your cart is empty.
{{shoppingcart.totalQuantity}}
Cart contains ({{shoppingcart.totalQuantity}} item(s):
{{shoppingcart.subtotal}}
Proceed to Checkout