|
|
Home  Machine
Tools Accessories Flexbar |
Flexbar® |
Instant
Positioning-Instant Locking
UNIVERSAL HOLDER/POSITIONERS FOR
ALL AGD INDICATORS AND
ELECTRONIC SENSORS (Lug Backs Too!) |
| |
| The heavy duty FLEXBAR
is completely flexible; lets you reach over, under,
around, instantly and surely. Elimination of the large
assortment of rods, swivels, clamps and other hardware
necessary to reach and measure in obstructed areas.
Cuts set-up time as much as 75% to 90%. FLEXBAR sets
and locks with a simple twist of the lever.
- Top Mounting Clamp ("B"): (Telescopic
Action) Grips objects from .125" up to .510"
diameter.
- Cable and swaged fittings are stainless aircraft
and Mil Spec Grade.
- Locked by Tensioning of Cable, incredible rigidity
is achieved by this design.
(No Movement once locked).
- Cam Action Locking.
|
|
|
|
| Flexible Arm has 14 Balls
& Sockets and When Flexed
Can turn a 2 1 /2" Dia. Circle; Above Units support
3 Lb. Payload. Back Oxide Finish.
On/Off Mag Base: 1 5 /8" x 1 7 /8" x 2"
High (approx.).
Pushbutton Type.
| Replacement
Cables for Flexbars: |
| Model
No. 80060-2, |
2
Ball Cable for Flexbar Models 18026-18038, 18051,
18058-18063, 11014 |
|
|
VARIETIES
OF FLEXBARS |
| Height |
Base
Feature |
Magnet
Pull (lbs) |
Model
No. |
Notes |
14" |
Fine
Adjustor |
None |
|
Fine
Adjustor
No Magnet |
15" |
Mag
Base |
65
On/Off |
|
No
Fine Adjustor |
16" |
Mag
Base with Fine Adjustor |
65
On/Off |
|
See
Picture(Top Left) |
13" |
5/16-18
Thread |
None |
|
See
Picture (Top Right) |
|
13" |
8mm
x 1.25 Thread |
None |
|
See
Picture (Top Right) |
|
| Flexbar
on Disc Mag Base 34810 |
| Model No.
18033 |
Base 3 1/8"
dis., 100 lb.pull. With Fine Adjustor Rod |
|
|
| Model
No. 18037 |
Base 3 1/8"
dis., 100 lb.pull. Without Fine Adjustor Rod |
| Flexbar
on V-Bottom Mag Base |
| Model
No. 18038 |
Base
2" x 2 1/4" x 2 5/8". With Fine Adjustor
Rod.
(Same Flexbar as on Models 18026-18031 but top end has
fine adjustor universal-5 1/2" long for easy adjustment
in any plane. Total reach 22". On/Off Mag Base with
V on Bottom. |
| Model
No. 18035 |
Base 2" x
2 1/4" x 2 5/8". Without Fine Adjustor Rod. |
|
|
Inspection Measurement 
