|
|
Home  Inspection
Measurement Facsimile® |
Facsimile® |
 Download
the Facsimile Application & Instruction Manual
Here |
| |
QUICK-SETTING
COMPOUND
MAKES ACCURATE HARD PLASTIC
REPRODUCTION IN 6 TO 8 MINUTES
|
| Facsimile®
is a special plastic compound kit which is used for duplicating
surface flats, roughness and for dimensional transfer
of inaccessible locations. Many other applications are
listed below and many more in our free 24 page appli-cations
booklet. |
-
Make duplicates for measuring, such
as gages, etc.
-
Test surface geometry, flatness,
microfinish, etc.
-
Make permanent records of surface
geometry, etc.
-
Make custom holding and nesting
fixtures.
-
Make quick jigs.
-
Make excellent stylus patterns.
-
Make instant molds and patterns.
- Cast small run parts and prototypes.
|
- Mask, fill in and seal.
- Fretting depth of blade dovetails in jet engines.
- Make potting, bonding and repairing easy.
- Closer inspection can be performed by
allowing the casting to cure in a pressure
vessel (15 p.s.i.).
- Facsimile®
will not affect the surface of ferrous or non-ferrous
materials to which it is applied.
- When casting in a “CONFINED” area, it is
better to cast 1 /2 of the internal shape.
- Remember—when casting without releasing
agent, an ACETONE soak removes Facsimile®.
|
TECHNICAL
DATA |
AVAILABLE
IN LARGER "ECONOMY" KITS |
A test submitted by E.I. Dupont DeNemour
& Company to an independent test lab showed
the following properties of Facsimile®:
TEST PIECE APPROXIMATELY 1” BY 1 /4” THICKNESS...
COMPRESSION TEST...Maximum load 6,800 lbs. Compression
strength 9,650 PSI.
MECHANICAL PROPERTIES...Ultimate tensile 3,415
PSI.
WATER ABSORPTION...(24 hours at 73 o ) 0.31%
by weight.
The kit contains all material and instructions.
The Facsimile®
can be diluted from a putty consistency to a
watery to best suit your job needs. If larger
quantities of Facsimile®
are desired they can be ordered in 3 lb. and
25lb. kits at proportionately lower prices per
pound.
Facsimile®
is Made in U.S.A. |
APPLICATIONS
AND TECHNICAL INFORMATION
| SOME OF FACSIMILE'S MANY
USES: |
|
|
| |
|
|
USE
#1: To create a master
or
checking gage, just pour in facsimile
and wait 6 to 8 minutes. Parts later can be conventionally
ground, machined, etc., if desired. Drawing above
shows creation of a thread gage. |
USE
#2: Shown above is
a quick and inexpensive method of cre-ating a
drill fixture. Just pour facsimile around drill
bushings and wait 6 to 8 minutes. Casting must
be a thick section 3/8” or more. USE MAGNETS TO
HOLD PLATES. |
USE
#3: Without removing
work from the machine set-up you can create a
“facsimile” test sample which can be carried away
for testing. Duplicates from 3 to 1,000 Micro
inches perfectly. |
|
|
USE #6: Highly
accurate and reliable casted replicas of internal
thread forms are not only possible but they
are being performed daily by fac simile users
the world over.
|
USE
#4: Used for checking
radii and angular internal and
external recesses, often in difficult to measure
areas. |
USE
#5: Optical projections
of forms made with “facsimile”
are duplicates within millionths! |
Facsimile®
is 100% Government approved for ANTI-CONTAMINATION
and all ATOMIC and NUCLEAR APPLICATIONS by virtue
of not containing (even traces of): All Halogens–Mercury–Sulphur–Lead–Copper–Brass–Phosphorous–Zinc–Arsenic–Antimony–
Aluminum–Cadmium–Tin–Bismuth–Boron or any compounds
thereof. CERTIFICATES WILL BE PROVIDED. |
ORDERING INFORMATION:
INTRODUCTORY KIT
One Lb. Kit No. 16000
Complete
Kit Contains:
FACSIMILE POWDER, 1 lb. Troy
01 - 120cc FACSIMILE liquid
01 - 60cc Flexbar Release Agent
01 - Powder scoop
01 - Molding clay
10 - Disposable cups (graduated)
10 - Wooden spatulas
01 - 1 oz. polypropylene measuring cup
COMPLETE KITS*
16000
1 lb. Kit FACSIMILE
16003
3 lb. Kit FACSIMILE*
16025
25 lb. Kit FACSIMILE |
Introductory
Kit-1 lb kit No. 16000 |
|
REFILLS FOR FACSIMILE
KITS
Order
No. |
|
|
16200
60cc Release Agent, soap based
16201
Pint Release Agent, soap based
16202
1 lb. Jar Facsimile Powder
16203
3 lb. Jar Facsimile Powder
16204
25 lb. Drum Facsimile Powder
16205
120cc Bottle Facsimile Liquid
16206
Pint Can Facsimile Liquid
16207
Quart Can Facsimile Liquid |
16208
Gallon Can Facsimile Liquid
16209
100 ea. 3 oz. Paper Cups Graduated
16210
100 ea. 1 oz. Paper Cups Graduated
16211
25 ea. 6-1/2 oz. Plastic Cups Graduated
16212
100 ea. Sticks, Mixing, Narrow
16213
1 lb. Bar Molding Clay
16214
100 ea. Sticks, Mixing, Wide
16914
60cc Release Agent, oil based
16915
Pint Release Agent, oil based |
For Air Shipments,
EXTRA CHARGE for D.O.T. Approved.
Containers and Overpacking for Facsimile Liquid
only.
|
 |
NEW-SUPER
RELEASE AGENT |
EPOXY
PARFILM ULTRA
A NEW and Highly Effective Release
Agent
for users of Facsimile "measure
image".
NON-CFC,
NON-VOC Formula.
|
Epoxy
ParFilm is the culmination of a
search for a suitable release agent for
epoxies.
The highly effective, very thin film obtainable
from Epoxy ParFilm Release is non-melting
and will not carbonize. This makes it
suitable for use with exothermic cures,
such as Facsimile "measure-image"
replication compound. |
Epoxy
ParFilm offers better release than polyvinyl
alcohol and wax with a much thinner film
application.
Epoxy ParFilm can be applied quickly with
the easily operated directional valve
which is standard.
Epoxy ParFilm is non-combustible, non-toxic
and non-allergenic. Contains NO CHLORINATED
SOLVENTS. |
Order No.
16136,
Epoxy
ParFilm, 18 ounce spray |
| Important
Notice to Users of REPRORUBBER by Flexbar:
SEPARATION
OF REPRORUBBER NOW POSSIBLE WHEN CASTING
REPRORUBBER FROM REPRORUBBER. |
|
For
Reprorubber® Thin Pour and Facsimile® Users
MONOJECT PRECISION
DISPENSING SYRINGES |
 .060”
dia. curved tip for injecting Reprorubber or Facsimile
into small holes. Tip can be cut to allow greater
flow. |
Provides
User With An Easy Method Of Injecting Pre-Mixed
Reprorubber or Facsimile Into Small Holes, Grooves
or Small Spaces.
10cc capacity syringes are easily filled and disposable
once used.
Sold in low cost packages of 10 each.
Model No. 16190,
Monoject 10cc Syringe Pac (10 each) |
|
|
|
Inspection Measurement 
